EPC PSK63 QSO Party 2012



Hello Dear PSK Contesters!

The European PSK Club has the honour to invite the radio amateurs all over the world to participate in the EPC PSK63 QSO Party. The objective of the competition is to establish as many contacts as possible between radio amateurs around the world by using the BPSK63 mode. Starting time is at 00:00 UTC, and ending time is at 24:00 UTC on Sunday 18 November, 2012.

EPC members should send signal report plus EPC membership number (example – 599 EPC00001). Please make sure that you don't separate «EPC» from the «Number», and you don't use any characters between. Please make sure that your EPC number consists of 5 digits. Other stations should send signal report plus QSO number, starting 001 (example – 599 001).

Mode BPSK63 should be designated in the report as PM and in any way differently! All times must be in UTC. All sent and received exchanges are to be logged. The Contest Committee accepts logs in the Cabrillo format ONLY. Name your Cabrillo file as your call sign (for example - mm0epc.cbr, mm0epc.txt or mm0epc.log). You should send your log upload via the Web interface: http://ua9qcq.com/contests/submit_log_eng.php   The contest name in the Cabrillo header must be «EPC-PSK63». All logs must be sent no later than 15 days after the contest (23:59 UTC 3 December 2012).

EPC PSK63 QSO Party Rules: http://www.epc-ru.ru/index.php?option=com_content&task=view&id=1434&Itemid=83
MixW statistics files by R3BB for PSK63 QSO Party: http://www.digitalrus.ru/Files/StatsEUEPC.zip

Good luck to all the participants. 73!

EPC PSK63 QSO Party Contest Committee

Popular posts from this blog

Delta Loop Antenna 10m-11m + Balun 4:1

Image
As i really enjoy using the 10m band and sometimes the 11m band to talk with friends around Athens, it came as a must of constructing a new antenna. Also i wanted to do this because i have an Albrecht 5890EU ,which operates in these frequencies and i didn't have an extra antenna to operate it. Due to the lack of space in my QTH(that is why i 'm using the long wire + UnUn antenna), i was trying to find a solution of a vertical polarization antenna ,with high efficiency and as small as possible.
Read more

DVRPTR v1 - Repeater Interface Cable Schematic

Image
If you want to create a duplex repeater using the DVRPTR v1 ,you must construct a cable and also you will have to use two transceivers. The cable diagram is shown bellow. You will need 3x6pin mini din male connectors and 2m of ethernet cable cat 5. Of course from the cable you will only use 4 wires from 8.
Read more