DVRPTR v1 - Repeater Interface Cable Schematic

If you want to create a duplex repeater using the DVRPTR v1 ,you must construct a cable and also you will have to use two transceivers. The cable diagram is shown bellow. You will need 3x6pin mini din male connectors and 2m of ethernet cable cat 5. Of course from the cable you will only use 4 wires from 8.

for any questions or anything else concerning the cable interface, please do not hesitate to contact me via email

73 de SV1JRF

Popular posts from this blog

Delta Loop Antenna 10m-11m + Balun 4:1

Yaesu FT-1907 & FT-1900 mmdvm DMR mod